English
Français
Deutsch
euskara
Русский язык
Italiano
Português
Nederlands
Polski
Greek
Lietuva
Türkçe
日本語
한어
中文
தாமில்
فارسی
हिंदी
Tiếng Việt
ภาษาไทย
Pilipino
Indonesia
தாமில்
![[New Product] Quasi-Continuous Fiber Lasers](/static/upload/image/1634543574241986.jpg)
![[Application] High Power 780nm for laser cooling and manipulation of Rb atoms](/static/upload/image/1634612309600803.jpg)
![[Application] Medical Device Manufacturing with FCPA](/static/upload/image/1634611559613801.jpg)
![[Application] DOEs for Beam Shaping](/static/upload/image/1634610970173110.png)
Send us a message
CLOSE
Laser glass cutting with ultra-short IR pulses is lately growing to become a key technique for the high throughput glass processing. Cutting thick glasses (500um) using this technique possess unique challenges, as the laser energy needs to be both foc
read moreCancer is one of the main causes of morbidity and mortality across the globe. Hence, attempts are focused on the early-stage detection of cancer, and optical spectroscopy has been largely used for early diagnosis of cancer. Fluorescence or molecular
read moreWe are proud to announce a new product NIRman Combi fiber probe, which opens up new perspectives and significantly expanded the capabilities of fiber spectroscopy. Raman and NIR spectra contain qualitative and quantitative information on the chemical
read moreDamien presented on All-Fiber CPA Toward High Peak Power fs Pulses at 1875nm Using Normal Dispersion Thulium Fiber (NDTF) at CLEO-PR on 5August2020 in Session 5H Fiber Optic Light Sources. CLEO-PR was held online for the first time due to the COVID19
read moreSintec Optronics sucessfully participated in Laser World of Photonics Shanghai from 3 to 5 July 2020.
read moreLaser engraving, which is a subset of laser marking is the practice of using lasers to engrave an object. Laser marking, on the other hand, is a broader category of methods to leave marks on an object, which also includes color change due to chemical/
read moreThe laser beam enter a beam expander after the laser beam is generated in the laser resonator. The most common type of beam expander is derived from the Galilean telescope which usually has one negative input lens and one positive output lens. The inp
read moreWhen Q-Switching lasers at high repetition rates, it is normal to observe a giant first pulse after a pause in operation. For many applications this excess energy must be dissipated before or during the next modulation cycle. For example, in lasermarkers, when the time taken for the scan
read moreIt was a great pleasure to participate in Photonics West 2020 conference and exhibition. Damien gave an oral presentation on our research Toward High Peak Power Ultrashort Pulses @ 2um Using Normal Dispersion Thulium Fiber In All-Fiber Laser Amplifier
read moreGeneral information Lenses used in combination with XY galvanometer scanners are called -theta lenses, plane field objectives or simply scan lenses. -theta lenses are used in various applications from industrial material processing, drilling, welding
read moreThe Quasi-Continuous Fiber Laser Series ranges from 75W to 600W, with higher electro-optical conversion efficiency, better optical quality and lower maintenance cost. This series product is a perfect alternative of existing light-pumped YAG laser and
read moreThe manipulation of Rb atoms is commonly performed using diode-based laser systems typically producing several hundred mW of usable 780nm power. Many atom optics applications however favour higher laser power whilst maintaining a narrow linewidth and
read moreLasers are often integral to the production of components for a range of application areas, including medical device manufacturing. These parts are then integrated in numerous products that vary from complex surgical instrumentation to simple single-use products that are used at the time of need by caregivers in hospital settings or out in communities. Designers and manufacturers of medical device
read moreSintec Optronics sucessfully participated in Laser World of Photonics India in Mumbai on October 17 to 19, 2019.
read moreDr. James Chen, Mr. Mark Webster, Mr. Masashi Wada, Ms Annie Zhou (from left) Dr. James Chen, the director of Wuhan Sintec Optronics Co. Ltd and Ms Annie Zhou, the director of Sintec Optronics Pte Ltd of Singapore met with Mr. Mark Webster, CEO of Goo
read moreA diffractive optical element (DOE) uses thin micro-structure patterns to alter the phase of the light that is propagated through it. Those micro-structures, once properly designed, can manipulate the light to almost any desired intensity profile or s
read moreWe will be participating in Laser World of Photonics India 2019 which will be held in Bombay Exhibition Center in Mumbai from 17-19 October 2019. We will be showcasing products such as f-theta lens, polarisation components, Spatial Light Modulator, scanhead, Q-switches, laser sources, etc. We look forward to meeting with everyone during the exhibition. Please drop by our booth #4632 in Hall 4 for
read moreMore than 30 officers and professionals from Thailland, South Africa, Wuganda, Yeman and Technical Promotion Committe of United Nations visit Sintec Optronics and Sintec Industrial Park on Sept. 20, 2019.
read moreDr. James Chen has been appointed as business consultant of INNOE.
read moreThe first meeting in 2019 of the members of directors of Hubei Provincial Laser Association of China (HLA) was held in Wuhan on June 14, 2019. The deputy director of HLA and our director Dr. James Chen attended the meeting.
read morePE COI Annual Conference 2019, organised by A*STARs Singapore Institute of Manufacturing Technology (SIMTech) in collaboration with Singapore Precision Engineering and Technology Association (SPETA), was held on 8 May 2019. The theme for this years
read moreSintec Optronics sucessfully participated in Laser World of Photonics Shanghai from 20 to 22 March 2019.
read moreMr.Adrian Meldrum, SVP & Mr.Bryan Han of G&H, visited Wuhan Sintec Optronics on 4th ,Dec,2018.
read moreThe new Vulcan laser cleaning systems delivers up to 5x the processing speed of conventional tire mold cleaning systems with an unprecedented 500 – 1600 Watts of cleaning power, with its industry leading laser pulse energy, the Vulcan is the new definition of portability and convenience for tire mold cleaning and preparation.
read moreA leading supplier and manufacturer of a wide range of photonics products such as lasers,laser parts & machines.
Office: 18 South Liu Fang Yuan Road, Sintec Industrial Park, Optics Valley of China, Wuhan Hubei, 430205 PR China
Mobile/Wechat: +86 19913132317
Whatsapp: +86 19913132317
E-mail: sales@SintecOptronics.cn