laser,optics,laser parts-marking,cutting,welding machine,CO2 laser,DPSS laser,fiber laser,microchip laser,diode,mirror,lens,AOM, galvanometer,Q-switch,marking head,fiber-coupled,lamp,power supply,powe

Structure of Laser Marking Head

A laser marking heads consists of the following parts:Galva + driver (board)Mirror + mirror holder (related to wavelength)Control card (marking card) with softwareD/A card (is needed if the output of the control card is digital)F-theta lens (spacer or called adaptor is needed if the space/distance b

[New Product] Narrow Linewidth Diode Lasers

The STXL series narrow linewidth diode lasers are wavelength-stabilized lasers, utilizing wavelength-locking technique with volume Bragging gratings (VBG) which forces the central wavelength tolerance to be ±0.5nm and the optical bandwidth to be less than 0.1nm. In addition to provide narrow spectral bandwidth, these lasers also deliver high output power and excellent stability at 532nm, 638nm, 784nm, 785nm, 808nm, 830nm, 976nm or 1064nm output wavelengths, with power ranging from 100mW to 800mW

Sintec Optronics Attended PSECE 2022 (Philippine Semiconductor & Electronics Convention and Exhi

Sintec Optronics attended the 17th PSECE Exhibition on 16-18 Nov 2022, in Manila, Philippines. The theme of PSECE this year is “Harnessing Digital Transformation to Accelerate Economic Recovery” and it features exhibitions from more than 200 companies, including overseas pavilions from China, Singapore, Germany, and Taiwan. Sintec promoted our advanced manufacturing and laser processing solutions to customers in the semiconductor and manufacturing industries.

Sintec Sponsored and Attended Photonics@SG 2022

Sintec Optronics attended the annual Photonics@SG Conference on 10 November 2022 as one of the sponsors. The event is organized by LUX Photonics Consortium Singapore, in collaboration with Optonique Canada and EPIC Europe. As one of the sponsors, we showcased our service offerings and promoted our partners’products to the local academia and industrial participants, as well as international delegates, to great interests and response.

[New Product] Hand-held Laser Power Meter

The hand held power meter is a low cost and lightweight alternative and is Ideally suited for industrial, scientific, and medical applications to use it when setting up your systems or as a service tool to ensure maximum performance of your laser system at any time.

[New Product] Diode Drive Modules

SYL series diode drivers are designed as individual modules and they are very easily integrated into the user’s power supply or control systems. These modules are DC/DC current-constant output or AC/DC voltage-constant plus DC/DC current-constant output. The user can design his own display to show the driving current, voltage, temperature etc. Our drive modules are widely used in laser diodes, diode chips, LEDs and fiber lasers.

Mr. Bernhard Westerhoff visited Sintec

Mr. Bernhard Westerhoff of Sill Optics visted Sintec on 14 June 2022. He discussed with Sintec on the topics of deepening collaboration in Southeast Asia and improving customer experience. There was also a remote cloud meeting with Guangzhou Ante Laser, a subsidiary of Sintec Group, on potential opp

Lasers for Lithography

Lithography is the transfer of a designed pattern onto a flat surface, either directly or via an intermediate medium - excluding areas of the surface where the pattern is not required. In photomask lithography, where a design is patterned onto a substrate, a laser is used to expose the pattern, allowing deposited material to be etched away, preparing it for further processing. This lithography met

ATR Fiber Probe for Harsh and Hazardous Environment

We introduce a new product ATR fiber probe for harsh and hazardous environment (high temp, pressure, pH, vibration, etc.) with 12mm diameter shaft (for industrial application) and 6mm diameter shaft (for lab applications). These Fiber Optic ATR-Probes can be used for process-spectroscopy either in Near- or Mid-IR range for in-situ and in-line reaction monitoring in a broad temperature range from -

Precision Microwave Generation

In the last years the demand for ultra-low noise microwave (MW) and radio-frequency (RF) signal sources have gained more and more importance. Standard industrial applications and high-end academic experiments require ever higher precision: Radar systems Defence communications Photonic ADC Ultra-stable clocking Test and measurement Satellite communications Particle accelerators, FELs Coherent commu

Sintec Participated in LUX Networking Meetings Online

Sintec Optronics recently participated in a LUX Photonics Consortium networking meeting session online ! LUX is a consortium of photonics companies in Singapore that have come together to share their technologies and capabilities with each other. Vari

Optical Isolator

An optical isolator, or optical diode, is an optical component which allows the transmission of light in only one direction. It is typically used to prevent unwanted feedback into an optical oscillator, such as a laser cavity. The operation of the dev

Choosing the Right Galvanometer and Servo for the Job

Galvanometer-based optical scanners are the preferred positioning solution for an increasingly broad range of industrial, scientific, imaging, and medical laser applications. While a number of scanning approaches are available, galvanometer-based scanners commonly called galvos offer flexibility, speed and accuracy at an attractive cost. While many imaging applications take advantage of the galvos

$Optimizing Laser Glass Cutting with Diffractive Beam Shaping$

Optimizing Laser Glass Cutting with Diffractive Beam Shaping

Laser glass cutting with ultra-short IR pulses is lately growing to become a key technique for the high throughput glass processing. Cutting thick glasses (500um) using this technique possess unique challenges, as the laser energy needs to be both foc

Spectral Fiber Sensors for Cancer Diagnostics

Cancer is one of the main causes of morbidity and mortality across the globe. Hence, attempts are focused on the early-stage detection of cancer, and optical spectroscopy has been largely used for early diagnosis of cancer. Fluorescence or molecular

NIRaman Multichannel Fiber Probe

We are proud to announce a new product NIRman Combi fiber probe, which opens up new perspectives and significantly expanded the capabilities of fiber spectroscopy. Raman and NIR spectra contain qualitative and quantitative information on the chemical

Oral Presentation at Conference for Lasers and Electro-Optics (CLEO) Pacific Rim

Damien presented on All-Fiber CPA Toward High Peak Power fs Pulses at 1875nm Using Normal Dispersion Thulium Fiber (NDTF) at CLEO-PR on 5August2020 in Session 5H Fiber Optic Light Sources. CLEO-PR was held online for the first time due to the COVID19

Sintec Participated in Laser World of Photonics Shanghai

Sintec Optronics sucessfully participated in Laser World of Photonics Shanghai from 3 to 5 July 2020.

Laser Engraving

Laser engraving, which is a subset of laser marking is the practice of using lasers to engrave an object. Laser marking, on the other hand, is a broader category of methods to leave marks on an object, which also includes color change due to chemical/

Basics of Beam Expander

The laser beam enter a beam expander after the laser beam is generated in the laser resonator. The most common type of beam expander is derived from the Galilean telescope which usually has one negative input lens and one positive output lens. The inp

First Pulsing Control of AO Q-switch Drivers

When Q-Switching lasers at high repetition rates, it is normal to observe a giant first pulse after a pause in operation. For many applications this excess energy must be dissipated before or during the next modulation cycle. For example, in lasermarkers, when the time taken for the scan

Attended Photonics West 2020 in San Francisco

It was a great pleasure to participate in Photonics West 2020 conference and exhibition. Damien gave an oral presentation on our research Toward High Peak Power Ultrashort Pulses @ 2um Using Normal Dispersion Thulium Fiber In All-Fiber Laser Amplifier

Basics of F-theta Lenses

General information Lenses used in combination with XY galvanometer scanners are called -theta lenses, plane field objectives or simply scan lenses. -theta lenses are used in various applications from industrial material processing, drilling, welding

[New Product] Quasi-Continuous Fiber Lasers

The Quasi-Continuous Fiber Laser Series ranges from 75W to 600W, with higher electro-optical conversion efficiency, better optical quality and lower maintenance cost. This series product is a perfect alternative of existing light-pumped YAG laser and

News

Structure of Laser Marking Head

[New Product] Narrow Linewidth Diode Lasers

Sintec Optronics Attended PSECE 2022 (Philippine Semiconductor & Electronics Convention and Exhi

Sintec Sponsored and Attended Photonics@SG 2022

[New Product] Hand-held Laser Power Meter

[New Product] Diode Drive Modules

Mr. Bernhard Westerhoff visited Sintec

Lasers for Lithography

ATR Fiber Probe for Harsh and Hazardous Environment

Precision Microwave Generation

Sintec Participated in LUX Networking Meetings Online

Optical Isolator

Choosing the Right Galvanometer and Servo for the Job

Optimizing Laser Glass Cutting with Diffractive Beam Shaping

Spectral Fiber Sensors for Cancer Diagnostics

NIRaman Multichannel Fiber Probe

Oral Presentation at Conference for Lasers and Electro-Optics (CLEO) Pacific Rim

Sintec Participated in Laser World of Photonics Shanghai

Laser Engraving

Basics of Beam Expander

First Pulsing Control of AO Q-switch Drivers

Attended Photonics West 2020 in San Francisco

Basics of F-theta Lenses

[New Product] Quasi-Continuous Fiber Lasers

Contact Us

Products

News & Download

Subscription

Send us a message