Exhibiting at LASER WORLD of PHOTONICS INDIA 17-19 Oct 2019

We will be participating in Laser World of Photonics India 2019 which will be held in Bombay Exhibition Center in Mumbai from 17-19 October 2019. We will be showcasing products such as f-theta lens, polarisation components, Spatial Light Modulator, scanhead, Q-switches, laser sources, etc. We look forward to meeting with everyone during the exhibition. Please drop by our booth #4632 in Hall 4 for

14 Countries Guests Visited Sintec Optronics

More than 30 officers and professionals from Thailland, South Africa, Wuganda, Yeman and Technical Promotion Committe of United Nations visit Sintec Optronics and Sintec Industrial Park on Sept. 20, 2019.

Dr. James Appointed as Business Consultant of INNOE

Dr. James Chen has been appointed as business consultant of INNOE.

Dr. James Attended the Meeting Organized by Hubei Provincial Laser Association of China

The first meeting in 2019 of the members of directors of Hubei Provincial Laser Association of China (HLA) was held in Wuhan on June 14, 2019. The deputy director of HLA and our director Dr. James Chen attended the meeting.

Sintec Attended PE COI Annual Conference 2019 & Exhibition

PE COI Annual Conference 2019, organised by A*STARs Singapore Institute of Manufacturing Technology (SIMTech) in collaboration with Singapore Precision Engineering and Technology Association (SPETA), was held on 8 May 2019. The theme for this years

Sintec Optronics Sucessfully Participated in Laser World of Photonics Shanghai

Sintec Optronics sucessfully participated in Laser World of Photonics Shanghai from 20 to 22 March 2019.

SVP and Head of Industrial Photonics of G&H visited Sintec Optronics

Mr.Adrian Meldrum, SVP & Mr.Bryan Han of G&H, visited Wuhan Sintec Optronics on 4th ,Dec,2018.

Laser Mold Cleaning

The new Vulcan laser cleaning systems delivers up to 5x the processing speed of conventional tire mold cleaning systems with an unprecedented 500 – 1600 Watts of cleaning power, with its industry leading laser pulse energy, the Vulcan is the new definition of portability and convenience for tire mold cleaning and preparation.

Canadian delegation visited Sintec Optronics

On October 26, 2018, the Canadian delegation including Ms Lysanne PICARD, International Affairs Advisor of Ministry of Economy, Science and Innovation, Ms Marie-Christine FERLAND, General Manager of Pole of Excellence Optonique, Mr Maroun MASSABKI, Development and Innovation Director Optech (Centre for Applied Research and Technology Transfer in Optics/Photonics), accompanied by Dr SOO Choi Pheng,

Sintec Optronics Participated in Southern Malaysia Metalworking and Machine Exhibition

Sintec Optronics participated in Southern Malaysia Metalworking and Machine Exhibition at Johor from Oct. 18 - 21, 2018.

Sintec Optronics Participated in Industrial Transformation Asia-Pacific 2018

We exhibited at Industrial Transformation Asia-Pacific 2018 in Singapore Expo from Oct. 16 to 19! Thank you to everybody who visited us at our booth!

Exhibiting at Laser World of Photonics India 2018

Welcome to visit us!!!

Ultrafast Laser in Life Science

Empowering biological scientists to see deeper and at higher resolution and frame rates. Biologists, neurobiologists and physicists are using bioimaging techniques to better understand the biological structures and processes of the brain. Over the pas

New Design Laser Rust Removing Machine

We would like to introduce the new design of our laser rust removing machine. This new machine is now equipped with 100W or 200W Fiber laser, larger laser power make the rust removing process become faster and easier. We also designed new hand piece a

Optical Measurement of Narrow Holes

By: Roei Yiftah, Moshe Danziger and Shmulik Barzilay General Measuring deep and narrow holes with an aspect ratio of 1:5 (Diameter : Height) has always been a difficult and largely an unsolved problem. This is even more problematic if not only the bot

[New Product] Lens for Ultrashort Pulsed Laser Applications

Because of the multi photon absorption caused by internal back reflections and the resulting dielectric breakdown, a ghost free design is most important for the use of ultrashort pulsed lasers.

Scanning Probe Microscope for nanotechnologies

[New Product] Non-contact 3D Measurement Equipment

This SMART sensor measures 10,000 points/sec and allows fast 2D profile measurement, analysis and feature evaluation. Built in Smart technology also provide a standalone sensor using Web based interface without the need of installing software on PC

FARO’s Director Visited Sintec Optronics

Mr. Edward, the director of FARO with Jose and Howard, visited Sintec Optronics on April 4, 2018.

Laser De-Painting

/static/upload/image/1634608944963946.jpg

Sintec Optronics sucessfully participated in Laser World of Photonics Shanghai

Sintec Optronics sucessfully participated in Laser World of Photonics India from 14 to 16 Sep 2017.

Laser Clean

New Green Cleaning Technology Laser Cleaning Laser cleaning is basically blast off the contaminants or impurities on the surface of the target by applying laser pulse directly to them. The great control over power and pulse parameters offer by laser a

Ultrafast Laser 3D Manufacturing System

Our proprietary technology on advanced ultrafast lasers based 3D manufacturing (Additive Manufacturing and Subtractive Manufacturing) opens a variety of opportunities in many fast-growing industries like aerospace, defense, bio-medicals, sensors, and

Low GDD Mirrors and Optics for Ultrafast Pulses

Low GDD Ultrafast mirrors are designed for femtosecond applications to provide an optimized performance at certain wavelength and angle of incidence (AOI). This is achieved by careful selection of coating stacks to combine high reflectivity and low GDD value (from -10 fs2 to 10 fs2 at design bandwidth) at the same time. Such coatings are used for external beam manipulation applications where pulse