We supply CO2 compact Manual Attenuators that allow you to vary laser output power.
Our Manual Attenuators allow the user to externally vary the power delivered from the laser. Many lasers only vary their output power by pulsing full power on and off, and this does not always provide the fine levels of control needed for some materials. This device will give infinitely variable control of the transmitted beam from approximately 6% to 100%. Using ‘enhanced’ coated Brewster plates the transmittance range can be changed from 0.04% to 98%.
When used with a laser of up to 100W the CO2 compact Manual Attenuator can left be air-cooled. When used above 100W then the optional water-cooled jacket should also be fitted.
Vary power delivered from the laser
Optional cooling jackets
Provide fine levels of control
The attenuator is a cost-effective solution to low-power beam delivery that is easy to understand, easy to use and easy to order.
|Part Number||Height||Length||Clear Aperture|
|Laser Power||Clear Aperture|
|Up to 500W||14.5mm to 22mm|