CNC Control Card & Software

  • Update:Jul 03, 2021
  • View:

Our CNC2000 control card and software can maximally support 6-axis control at the same time. It can be used in the numerical control system of 3-axis linear motion + 3-axis rotational motion (X,Y,Z,C,A,B) or 6-axis rotational motion (6-joint mechanica

We are promoting laser lamps, galvos, marking heads, green laser pointers etc till the stock is sold out. Pleasee click here.

CNC2000 Series Control Cards and Software

Our CNC2000 control card and software can maximally support 6-axis control at the same time.  It operates under Windows such as Win10, Win7, Win2000, WinXP, Windows98, WindowsSME or Windows95. It can be used in the numerical control system of 3-axis linear motion + 3-axis rotational motion (X,Y,Z,C,A,B) or 6-axis rotational motion (6-joint mechanical arm). Also it can control all the lasers in the market such as YAG lasers, CO2 lasers, fiber lasers and ultrafast lasers.

The CNC control card is an Ethernet card which is more convenient for connections. The advantages and features of the CNC control card are

Our control cards are made with multi-layer circuit boards and power source and ground are separated into two layers. Although the card costs more, they improve the performance of anti-interference. Thus our cards can be used in precise control.

Our software’s functions are strong and easy to operate. The programming is simple and easy. There are 3 methods to write a programming: automatic conversion of PLT and DXF files, teaching or CNC programming. The software programming panel is as follows:

The main functions of the software programming are as follows:

The main programming points are as follows:

Ordering Information

Part number

Description

ST-CNC2000-4S

4-axis control and to switch on/off laser beam such as YAG laser

ST-CNC2000-4M

4-axis control and to fully control all types lasers such as YAG, CO2 or fiber lasers

ST-CNC2000-6S

6-axis control and to switch on/off laser beam such as YAG laser

ST-CNC2000-6M

6-axis control and to fully control all types lasers such as YAG, CO2 or fiber lasers

STAC Series CNC Control Boards & Software

1. STAC-MCC3721 Control Boards

The control boards used to control lasers, laser cutting heads, XYZW motion and capacitor height sensor in the cutting heads. STAC-MCC3721H is to control XYZ 3-axis motion and STAC-MCC3721NC is to control XYZW 4-axis motion.

cutting heads

The I/O ports are defined as following table.

Port

Function

Remark

Power input

+24V

DC24V input + end

24V/10A DC. Recommend to use DC 24V/10A power supply

PG

protective ground

0V

DC input - end, power GND

Axis’ limit input

X+

X Axis’ positive limit input, special signal, low-level propagation is effective.

X Axis’ limit input

X0

X Axis’ origin signal, special signal, low-level propagation is effective.

X-

X Axis’ negative limit input, special signal, low-level propagation is effective.

0V

GND, X Axis’ limit signal COM port

Y+

Y Axis’ positive limit input, special signal , low-level propagation is effective.

Y Axis’ limit input

Y0

Y Axis’ origin signal, special signal, low-level propagation is effective. YY Axis’ negative limit input, special signal, low-level propagation is effective. 0V GND, Y Axis’ limit signal COM port

Y-

Y Axis’ origin signal, special signal, low-level propagation is effective. YY Axis’ negative limit input, special signal, low-level propagation is effective. 0V GND, Y Axis’ limit signal COM port

0V

Y Axis’ origin signal, special signal, low-level propagation is effective. YY Axis’ negative limit input, special signal, low-level propagation is effective. 0V GND, Y Axis’ limit signal COM port

Z+

Z Axis’ positive limit input, special

signal, low-level propagation is

effective.

Z Axis (standby ) input

Z0

Z Axis’ origin signal,special signal,low-level propagation is effective.

Z-

Z Axis’ negative limit input,special signal,low-level propagation is effective.

0v

GND, Z Axis’ limit signal COM port

W+

W Axis’ positive limit input,special signal,low-level propagation is effective.

W Axis(Rotation Axis / standby ) input

W0

W Axis’ origin signal,W

W-

W Axis’ negative limit input,special signal,low-level propagation is effective.

0v

GND, W Axis’ limit signal COM port

Axis’ controlling ports

X

X Axis’ controlling signal

DB15female

Y1

Y1 Axis’ controlling signal

 

Y2(Z)

Y2(Z)Axis’ controlling signal

If Y Axis is set up as dual - drive mode, it is Y2Axis; if Y Axis is set up as single drive mode, it is Z Axis’ controlling port( standby ).

W

W Axis’ controlling signal

Rotation Axis( standby )

General custom outputs

DO1

DO1 general output port

The function of output port can be set up arbitrarily by software. Passive output port has the same output TTL with COM port.

DO2

DO2 general output port

COM1

general output COM port

DO3

DO3 general output port

DO4

DO4 general output port

DO5

DO5 general output port

DO6

DO6 general output port

COM2

general output COM port

DO7

DO7 general output port

DO8

DO8 general output port

DO9

DO9 general output port

DO10

DO10 general output port

COM3

General output COM port

DO11

DO11 general output port

DO12

DO12 general output port

Thyristor output

DO13

DO13 thyristor output port

DCV output: 24V, drive current: 1A

DO14

DO14 thyristor output port

COM4

Thyristor output COM port

DO15

DO15 thyristor output port

DO16

DO16 thyristor output port

Power output

24A

The first DC24V output +end

Can be used as Axis’ limit switch/general output port can supply standard TTL

24B

The 2nd DC24V output +end

0V

The GND for DC24V output

PWM output

P+

PWM signal output +end

The TTL of PWM output is 24V/5, which can be configured by the jumper nearby.

P-

PWM signal output -end

Analog output

AO1+

Analog output port +end

The voltage of analog output is from 0V to 10V, which can be configured by software.

AG

The GND for analog output

AO2+

Analog outpot port +end

AI

Analog input

General input

DI1

general input port, low-level propagation is effective (Default)

 

DI2

general input port, low-level propagation is effective (Default)

 

DI3

general input port, low-level propagation is effective (Default)

 

DI4

general input port, low-level propagation is effective (Default)

 

DI5

general input port, low-level propagation is effective (Default)

 

DI6

general input port, low-level propagation is effective (Default)

 

DI7

general input port, low-level propagation is effective (Default)

 

DI8

general input port, low-level propagation is effective (Default)

 

DI9

general input port, low-level propagation is effective (Default)

 

DI10

general input port, low-level propagation is effective (Default)

 

DI11

general input port, low-level propagation is effective (Default)

 

DI12

general input port, low-level propagation is effective (Default)

 

DI13

general input port, low-level propagation is effective (Default)

 

DI14

general input port, low-level propagation is effective (Default)

 

DI15

general input port, low-level propagation is effective (Default)

 

0V

Signal input public port

 

Ethernet

1X

Industrial Ethernet interface

These four ports can be arbitrarily configured

2X

Industrial Ethernet interface

3X

Industrial Ethernet interface

4X

Industrial Ethernet interface

General serial port

RS232

RS232 serial port

It can butt-joint with laser

2. Laser Cutting Software STAC-SC2000

STAC-SC2000 CNC cutting software is designed for flat fiber laser cutting which includes graphic drawing and editing, cutting process dealing, cutting process controlling, system monitoring, components monitoring and debugging, and so on.

Features:

1) Simple Operations, Powerful Functions.

2) Complete cutting process, debugging easily.

3) Rea-time alarm, stable and reliable.

cutting software

UI design is very clear, from up to down: title option, tool option, alarm option, view option, running control option, message bar, graphic parameters option, and status bar. The functions of each section shows as below:

Section

Function

Remark

Tittle bar

Display software’s name and version number.

 

Tool option

Mainly collects the tools needed for software

operation, it has five submenu:

Start/Draw/System Analysis/Advanced/Nest.

User can do graphic drawing, graphic editing,

graphic transformation, adding lead line,

monitoring running status, configuration

machine tool.

 

Alarm bar

Display the current system alarm.

Alarm will be displayed in pop-up window, and once the alarm is cleared, the pop-up window will be gone.

View section

Graphic drawing/displaying section, displaying section of the machine’s cutting area.

 

Running control

option

Run all kinds of cutting actions by software.

 

Message bar

Display the current running status in scrolling to attract user’s attention.

 

Layer properties

option

Set up layer properties such as layer process, graphic transformation and so on.

 

Running status

Display the running status, running location, cutting speed and so on.

 

Operation flowchart:

cutting software

A full package consists of a laser cutting head, a control board and cutting software.

cutting head and software

The functions of each part is summarized as following:

Part name

Part number/combination

Remarks

Cutting head

STAC-A200MS

<2kW, manual focusing

Cutting head

STAC-A200MS-3D

<2kW, manual focusing, smaller 3D nozzle size for tube cutting

Cutting head

STAC-A260E

<2kW, electrical focusing

Cutting head

STAC-A290E

<2kW, electrical focusing, smaller 3D nozzle size for tube cutting

Cutting head

STAC-A280E

<4kW, electrical focusing

Cutting head

STAC-A295E

<4kW, electrical focusing, smaller 3D nozzle size for tube cutting

Control system

STAC-MCC3721H + STAC-SC2000

3-axis (X, Y1, Y2, Z) flat-plate cutting. Y1 & Y2 have same signals.

Control system

STAC-MCC3721NC + STAC-SC2000

4-axis (X, Y1, Y2, Z, A) flat-plate cutting. A is used to exchange tables.

Control system

STAC-MCC3723+STAC-FTC10+SCTube

Tubing cutting such as round, square, L, H and rotation

Control system

STAC-MCC3723+STAC-FTC10+STAC-EX15*2+SCTube

Tubing & flat plate cutting

Total solution

STAC-A200MS+STAC-3721H+STAC-SC2000

Internal height floating, for thin flat plate cutting

Total solution

STAC-A260E+STAC-MCC3721NC+STAC-SC2000

Internal height floating and auto-focusing, for thick flat plate cutting

Total solution

STAC-A200MS-3D+STAC-MCC3723+STAC-FTC10+STAC-SCTube

Professional tubing cutting such as round, square, L, H and rotation

Height floating

STAC-FTC10 (not including sensor nozzle)

Individual height adjusting, for tubing, flat-plate, 3D cutting

Height floating

STAC-FTC61 (not including sensor nozzle)

Individual height adjusting, supporting pulse step or servo motors

 

►► Laser Marking Software  Laser Welding Heads

Share: